Flexible Graphite Sheet
Handles corrosive & non-corrosive media including inorganic & organic acids & bares.
Ideal for valves, pumps, and flange gaskets.
Temperature range up to +5500° F.
Pressures to 10,000 PSI.
White Neoprene Sheet
Odorless & Tasteless.
USDA & FDA approved.
Resistance to weathering oil & gasoline.
Red Rubber Sheet
Used against hot or cold water, air & low pressure saturated steam, not exceeding 50 PSI.
Remains pliable & has low flow.
Temperature range of -40°f to 250°F.
600 PSI minimum tensile strength.
Gray Felt Medium Density
Made from virgin and reclaimed wool, and other fibers.
Used as a sealing medium.
Ideal for dust seals, vibration dampeners, and weather-stripping.
Viton® Sheet
Chemical, atmosphere oxidation, sun & weather resistance.
Retains properties from -20°F to 400°F.
Used with commercial fuels, oils, solvents & hydrocarbons.
Can be adhered.
Cork Sheet
Made form medium granule cork particles bonded with a
gelatin binder in sheet form. Highly compressible
material. Used for oil & non-oxidizing aqueous
solutions, gasoline & hydrocarbons. Temperatures to
200°F.
Pure Gum Rubber Sheeting
Highest rubber resiliency, tensile strength & abrasion resistance.
Used with moderate chemical, organic acids, alcohols & ketones.
Temperature range -65°F to 150°F.
Durometer: 30-40.
Tensile strength: 3500 PSI.
Plant Fibre Sheet
Manufactured from tough vegetable fibers impregnated with a chemical binder to resist penetration of liquids.
Heavily compressed to close tolerances. Designed for use against gasoline, oil, benzine, grease, hot & cold water.
Maximum temperature 250°F.
Conforms to government specifications. |
Cork & Neoprene Medium Hardness
Great compressibility combined with the resilience of neoprene
high cork content, minimum side flow.
Excellent for narrow, flange gaskets to low bolt load applications.
Temperatures to 2750°F.
Used for oil, non-aromatic petroleum derivatives, fatty oils & solvents (except chlorinated, aromatic keytone.
Compressed Non-Asbestos Sheet
Ideal for most pump, valve & pipe gasketing
Temperature range to 700°F.
Pressures to 900 PSI.
Buna-N Rubber Sheet
Copolymer of butadiene & acrylonitrile
Resistance to most petroleum oils & greases, gasoline & alcohols, L-P gases, fuel oils.
Good tensile strength & abrasion resistance
Temperatures to 300°F.
Neoprene
Ideal for applications subject to attack by most oils.
Higher heat resistance & slower aging than natural rubber.
Resistant to sunlight, ozone, abrasion, and chemical attack.
Not recommended for electrical insulation service.
EPDM Sheet
Resistance to oxidation, mild acids, alkalies, ozone, heat aging and synthetic fluids
Contains good electrical, impact & abrasion resistant properties.
Outstanding elongation & resistance to tear.
Temperature Range: -50°F to 325°F.
Cloth Inserted Black Rubber
Made from quality cotton fabric and rubber compounds.
Used where movement in service, bolts, clamps & pressures require reinforced rubber sheet.
Teflon® Sheet
Mechanical, electrical, temperature & friction-resisting properties.
Resists almost all chemicals. Temperature limit is 500°F.
Anti-stick property. |